SMD or SMT complete smd rework station by JBC Tools

JBC AM6850 The most advanced SMD rework station in the world

Truly an Advanced Rework station with many innovative features not found in other rework stations
Printer Friendly Page | Read (Analyzing the AM6850) by Jerry Howard | See the AM6850TP w/hot tweezers

AM6850 Complete Rework Station

Read Customer Testimonial

AM6850 $3990.00 Includes all accessories

View Cartridges for 2245 Handpiece
View Cartridges for 2210 Handpiece
View Cartridges for PA1200 Microtweezers

Recommended for use with the AM6850:
- 2245-009, 2245-010 and/or 2245-031, 2245-038
- PA1200 Micro Hot Tweezers
- PA4200 Hot Tweezers
- PA8120 Stand for Tweezers
- Micro Tweezers Cartridges
- Hot Tweezers Cartridges

See our AM6850TP with micro hot tweezers
See our AM6850SMD for a Complete Rework Station.

SMD Rework Station for rework and repair of through-hole and SMT boards.
It contains 4 modules which cover the main rework tasks. Optional Micro Hot Tweezers and Standard Hot Tweezers are available with numerous cartridges. Standard Hot tweezers can also be used for wire stripping.

Hot air for desoldering any size of SMD components. The station uses the exclusive JBC system, based on protectors-extractors (See image at bottom of page) and hot-air flow, which makes desoldering clean and quick, concentrating the heat on the IC, and protecting the rest of the circuit at the same time.
A medium-sized SMD can be desoldered in less than 20 seconds. When the IC is at desoldering temperature the extractor snaps the IC upward so fast that the leads are almost completely devoid of solder. This makes replacement of the same IC very easy if you wish.

Desoldering SMTs, through hole components and cleaning of through-hole components and pads by using the desoldering iron DR 5600, which contains an independent vacuum pump.

Pick & Place vacuum pen to aid in positioning components.

Soldering of all types of components, with the swift response, power and temperature recovery of the Advanced series. You can connect the Advanced 2010, 2210, 2045 or 2245 handpieces or PA1200 Microtweezers and PA4200 Hot Tweezers to the AM6850.

The station is easily controllable thanks to the precise information display. All of the functions of the console AC 2600 have an integrated password that allows you to adapt maximum functions for each user.

Apart from the standard setup as shown, any of the Advanced tools can be connected to both the soldering and desoldering modules; handpieces, desoldering iron, desoldering tweezers or solder feed iron.

In doing so, tools can be combined to set up the station to suit any specific task. The only limitation is that only one desoldering iron can be connected to the station.

SPECIFICATIONS:
	Power 1100 W
	Maximum power soldering iron 50 W
	Maximum power desoldering iron 75 W
	Power heating unit 1000W
	Temperature selection soldering iron: 90 - 450ºC (190 - 840ºF)
	Temperature selection desoldering iron: 90 - 450ºC (190 - 840ºF)
	Temperature selection hot air: 150 - 455 ºC (200 - 850ºF)
	Air flow regulation: 6 - 45 l/min
	Vacuum pump for holding ICs
	Antistatic control box with “skin effect”
	Weight of complete system 19.8 kg (44 Lbs)

AM 6800 INCLUDES:
	Control unit with air heater 1000W
	Handpiece 2245 with the cartridge 2245-003
	Desoldering iron DR 5600 with the tip 5600-003
	Foot Switch for hot blower
	Pick & Place MP 2260
	Extractor stand with: 5 extractors, 5 protectors and 2 tripods.
	Stands for soldering iron, desoldering iron and heater.
	Set of accessories. Click here for list
Optional Items for the AM6850:
	PA1200 Micro Hot Tweezers
	Cartridges for PA1200
	PA4200 Hot Tweezers
	Cartridges for PA4200
	PA8100 Stand for PA1200 or PA4200
	SC4945 Cartridge Stand for holding 12 cartridges
	2210 Small Handpiece for fine SMD work
	Cartridges for 2210 Handpiece

JBC AM6850SMD
SMD Rework Station
The most advanced rework station
in the world

JBC AM6000SMD complete smt rework station

Click on Image for Close-up Zoom-able View

See Image like it would look on your bench

Purchase the
AM6850SMD
as a Total Package
SMD Rework Station
and have the
Best of the Best

AM6850SMD Includes all of the above plus:

DI3000 Digital Dual Soldering Station

2210 (20 Watt handpiece) for precise soldering

Stands for Soldering Iron (AD8210) and Hot Tweezers (PA8110)

Soldering cartridge for handpiece (2210-009)

PA1200 hot tweezers

And two hot tweezer cartridges (1200-002)

And three SMD Cartridges 2245-009, 2245-010, 2245-031
Lowest price if purchased this way.
AM6850SMD $4990.00

tripod and protector for extracting qfp, plcc, and ic components

Process to desolder an IC with an AM6850 or JT7000
Click here to see the repair process	1. Fix the extractor 2. Hot-air melts the solder 3. IC is removed automatically 4. IC is virtually clean of solder
Time needed to desolder a medium - sized IC using this process: 20 seconds

Click here to see the repair process


MANUAL	EXPLODED VIEW		ELECTRICAL WIRING DIAGRAM		RANGE OF PROTECTORS AND EXTRACTORS	RANGE OF CARTRIDGES
SIZE: 1.694.914 Bytes	120 V SIZE: 670.269 Bytes	230 V SIZE: 976.744 Bytes	120 V SIZE: 142.413 Bytes	230 V SIZE: 211.791 Bytes	SIZE: 67.327 Bytes	SIZE: 49.590 Bytes

Video Clips of JBC Stations | JBC Ordering Catalog | JBC Price List | All JBC Products |JBC Package Deals | JBC Warranty | 2245 Cartridges | Stands
AD2700 | DI3000 | AD4300 | AR5800 | DS5300 | JT7000 | TE5000 | AM6500 | PA1200 | PA4200 | SC4945 | AC2600 | TI2650 | AL2500

Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042
1-800-394-1984 Toll Free (USA and Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-321-2803 Fax